Dec 20, 2017 Off Comments in Laser Cutting by
Why Choose the Laser Cutting Method Instead of the Water Jet

When it comes to cutting materials, most industries will end up choosing between laser cutting and water jet cutting. Each of these two methods may deliver your bottom line but in different ways. Depending on some aspects, one might be more appropriate than the other. Needless to say that both have their own set of pros and cons.

If you are still about to decide which system to invest in, you might first want to orient yourself about how they work and what are their pros and cons.

Laser cutting

For laser cutting, this system utilizes water or CO2 thus the term usually used is CO2 laser cutters. The beam that will do the cutting here is guided by mirrors and energy can be extracted from a gas. Here are its advantages:

This can cut different materials and thicknesses. Some of these materials are glass, plastic, wood, and metals except for those reflective ones.

Its precision is simply unparalleled. If this is what you want in your project, this process can offer this to you. This system can be set even to hundredths of a millimeter. So even if you plant to cut even the smallest portion, this is highly possible using this method of cutting.

The process can be done without causing a lot of mess and noise. As a matter of fact, using goggles is just for compliance as there is really nothing in the entire process that can harm the eyes.

Water Jet cutting

Unlike laser cutting, this process will use pressurized water to do its functions. Not only that, it also needs to incorporate other things to make its function more effective such as garnets and aluminum oxide. You can imagine the process of erosion when it comes to water jet cutting as it is almost just the same way. Here are the advantages:

This system can cut almost all types of materials and it has the ability to cut in all direction.

It is easy to set up. Most of the time, you only need to place a few weights over the material to be cut.

Unlike the other methods of cutting, the subject will hardly get heat throughout the entire process. The heat that is generated will be absorbed by the water.

By checking the mentioned benefits of each cutting method here, you should be able to determine which process is best for your project.